1 / 7ESP32 learning kit for learning Python 2023
SKU: HH-ROB-027
excl. VAT
The learning kit is compatible with Arduino and provides an advanced standalone Wi-Fi solution. It is ideal for developing applications, with support for Arduino IDE, Mongoose IoT, and MicroPython.
The delivery charge is calculated by the size of the parcel and is shown at checkout before payment; collection is free of charge.
Packaging and delivery specification
Package dimensions (L×W×H)
18×12×5 cm
Weight
0.35 kg
Dimensions and weight are estimates for delivery planning. The exact specification is the one in the document you receive — a price quote or an invoice.
Full description
The learning kit is compatible with Arduino and provides an advanced standalone Wi-Fi solution.
It is ideal for developing applications, with support for Arduino IDE, Mongoose IoT, and MicroPython.
The kit includes an integrated chip that enables connecting to a Wi-Fi network optimally, and it can run standalone applications or serve as a bridge to the Wi-Fi networking functions of another processor.
The module is equipped with a CP2102 chip and comes with update files for new versions.
Kit contents
- 1ESP32, Amica MCU model.
- 2Micro USB cable, one meter long, with a zinc shell for strong durability.
- 3Transparent breadboard with 400 holes, excellent for explaining how to use a breadboard.
- 420 LEDs in various colors suited to the kit.
- 520 resistors (220-330 ohm).
- 62 four-leg push buttons suitable for working with a breadboard.
- 72 potentiometers 1K-20K in different values
- 81 light-dependent resistor (LDR)
- 91 PCF8574 IO Expander I2C-Bus expansion board
- 10LM75 CJMCU-75 I2C-Bus temperature sensor
- 11MAX7219 digital display control
- 12RS232 TTL USB module converter adapter
Blue board
Features
100% brand new and high quality
MAX7219 digital display control
This module is compatible with 5V and 3.3V controllers.
You can use it with Arduino
The MAX7219 is an integrated serial input/output display driver,
which connects a processor to a 7-segment digital LED display with 8 digits.
Only three IO ports are used to drive an eight-digit display.
The MAX7219 supports blinking displays as well as graded displays.
Wiring instructions (for example, it can be connected to any IO port,
change the port definition in the program):
VCC: 5V
Ground: ground
DIN: P00
CS: P01
CLK: P02
Note
VCC and GND must not be connected in reverse, so as not to burn out the chip
Specifications
Material: PCB + electronic components
Power: 5V
Size: 82*15*12mm (L * W * H)
Shell color: blue and black
Features: I2C interface, I/O expansion module, two I/O expansion levels of 8 I/O (up to 8 PCF8574 can be used at the same time to expand up to 64 I/O)
Most important feature: 1. Supports two types of target board access interface: pin or in-line socket,
supports I2C bus cascading (using the in-line socket docking methods, multiple I2C modules can be used at the same time)
Typical application: I/O expansion when MCU I/O resources are scarce
Main resources: the PCF8574 I2C interface, 8-bit parallel
Information included
Test procedures (AVR, STM8, C8051F)
Product introduction: The LM75A or B is a high-speed I2C interface temperature sensor that converts temperature directly into digital signals from -55 °C to +125 °C and achieves an accuracy of 0.125 °C. The MCU can read the data of the internal registers directly through the I2C bus, and can operate four data registers through I2C to set different operating modes. The LM75A has three selectable logic address pins, which allow eight devices to be connected simultaneously on the same bus without address conflicts. Characteristics: I2C bus interface, 7-bit device address, slave address 1001xxx, 8 devices can be extended on the same bus; power supply range: 2.8V ~ 5.5V, temperature range: -55 °C ~ +125 °C; the 11-bit ADC provides a temperature resolution of 0.125 °C; temperature accuracy: ±2 °C (-25 °C ~ 100 °C), ±3 °C (-55 °C ~ 125 °C); programmable temperature threshold and hysteresis set point; to reduce power consumption, the current consumed in shutdown mode is only 1.0μA; the device can be used as a standalone temperature controller; ESD protection: under the JESD22A114 standard, it can pass the 2000V HBM mode; under the JESD22A115 standard, it can pass the 200V MM mode; under the JESD22-C101 standard, it can pass the 1000V CDM mode; the latch-up test is performed under the JEDEC standard (JESD78) and can reach 100mA; small 8-pin package: SO8, TSSOP8 ultra-small package XSON8U.
Frequently asked questions
The kit is suitable for middle school and high school, and also for post-secondary frameworks and adults.
The kit includes, among other things, an ESP32 board model Amica MCU, a micro USB cable, a transparent breadboard, LEDs, resistors, buttons, potentiometers, an LDR resistor, an expansion board, a temperature sensor, a digital display controller, and an adapter converter.
The kit is compatible with Arduino and offers support for the Arduino IDE, Mongoose IoT, and MicroPython.
Yes, the kit includes an integrated chip that provides a standalone, advanced Wi-Fi solution for optimal connection to the network.
The kit includes, among other things, a PCF8574 IO Expander expansion board, an LM75 temperature sensor, and a MAX7219 digital display controller.



