Hard case for 12 Meta Quest 3S VR headsets with custom internal foam fitting. The fitting is included in the price. VR headsets are not included. The picture is for illustration only and is not binding. It shows the case before custom fitting. Delivery time: 3 weeks.
40x40 aluminum profile, 40 mm long — original spare part for the GO KART 17 IN1 EDU kit. Sold in lengths from 40 to 340 mm, in 20 mm increments: select length, and in the cart the number of rods.
A base board that the ESP32-S3 board plugs into, with each of its pins brought out to a screw terminal. Wires are connected by screwing them in, with no soldering and no breadboard — a stable connection for a project that stays in the classroom.
A powerful ESP32-S3 board with 16MB of flash memory and 8MB of PSRAM, with built-in WiFi and Bluetooth. The pins are already soldered — it plugs straight into a breadboard. Suitable for projects in artificial intelligence, cameras, audio, and the Internet of Things.
General specifications: The cart is mobile on 4 high-quality swivel casters with brakes. Dual power feed to split the charging load at startup.
A complete robotics kit for the elementary school, compatible with the WeDo 2.0 core set (45300): controller, motor, motion sensor, tilt sensor, and building parts, in a blue storage box with a sorting tray. A compatible product, not an original product of the LEGO company.
A protective case for the Lenovo Tab K10 Pro tablet (10.6-inch) with a detachable Bluetooth keyboard, a touchpad, and backlit keys. The Hebrew and English letters are laser engraved, and the case stands at an angle for working and viewing.
A lab shaking table with a separate controller, adjustable speed and time, and interchangeable trays for different containers.
A metal spinning top that spins in the air above a magnetic base — a fascinating demonstration of magnetic forces and balance.
A pen-shaped rotary tool with 6 speeds, lighting, and a digital display, for engraving, drilling, sanding, polishing, and cutting.
A USB-rechargeable pen-style rotary tool for engraving, polishing, cutting, drilling, and cleaning, which can also be used while charging.
A small rechargeable rotary tool for drilling, cutting, polishing, and engraving, with interchangeable heads and accessories.
A set of small models of traffic signs, barriers, and traffic cones, for play and for talking about road safety.
A portable memory in a wooden body with a cap, in a pull-out wooden package — a respectable gift for staff, graduates, or guests.
Five spools of soft, heat-resistant silicone wire in a convenient dispenser box, for wiring circuits, robots, and soldering projects.
A small USB adapter that adds dual-band WiFi 6 wireless networking and Bluetooth 5.4 to a computer.
One handle with a frame and interchangeable blades for cutting wood, metal, plastic, and glass in handwork and models.
A cutting knife with a metal body and a retractable, adjustable blade, for cutting cardboard, fabric, carpet, paper, and packaging.
A small, sharp side cutter for cutting electrical wires, component legs, filament, and plastic parts.
A silver-coated polyester thread that conducts electricity, for sewing circuits on fabric in smart textile and LilyPad projects.
A wall power adapter with a 3 to 12 volt voltage selector and seven interchangeable DC heads, for operating devices and projects.
A small ESP32-S3 board with an OLED display and a speaker, for building a voice assistant based on artificial intelligence.
A relay module with two changeover contacts that switches between states on every press or pulse, and stays in the state even without a continuous press.
A NodeMCU board with WiFi and a small built-in OLED display, for showing data directly on the board.
A round desktop charger with 6 charging ports and a power cable, for charging several phones and tablets at once.
A kit of small electric motors for projects and for science and technology lessons: 6 DC motors with mounts, propellers, wheels, gears, switches, and battery connectors.
Building and programming kit with 280 pieces: bricks, gears, a hub, a motor, and sensors, for building moving models in STEM and robotics lessons.
A cardboard construction kit: plastic screws that join cardboard pieces without glue, a plastic screwdriver, and a safety saw for cutting and piercing cardboard.
A small tool for stripping the insulation from round cables: insert the cable, rotate the tool around it, and the insulation is cut to a uniform depth.
A soft silicone cover that fits over the face interface of the Meta Quest 3S headset, protects it from sweat and dirt, washes easily, and blocks light around the nose.
A padded hard case for carrying and storing Meta Quest 3S or Quest 3 virtual reality headsets, with both controllers, the charger, and accessories.
A flexible, heat-resistant silicone mat for soldering and electronics repair, with magnetic areas for screws, compartments for small parts, and a ruler.
A white coat for boys and girls with buttons, long sleeves, and pockets, for science lessons, the lab, a scientist costume, and special days.
A STEM kit for building electrical circuits on a base board, with colorful components that snap together, with no soldering and no tools.
A data and charging cable from USB-A to Mini USB (Mini-B), for connecting cameras, portable hard drives, dash cams, and players to a computer.
A small digital microscope that connects to a computer, phone, or tablet by USB, Micro USB, or Type-C, with 8 adjustable LED lights and a stand.
A handheld microscope that streams a live image to a phone or tablet over WiFi, with a rotating metal stand, for observation, learning, and inspecting small details.
A classic magnifying glass with a gold-colored metal frame and a wood-toned handle, for reading small print and observing details in science lessons.
A small battery tester with an LCD screen that shows the battery voltage and works without a battery of its own — for testing batteries before use in the classroom and lab.
An assortment of 450 monolithic ceramic capacitors rated 50V, in 15 different values, 30 pieces of each value, in a clear compartment box.
A large pad that covers the work desk, protects it, and serves as a surface for the keyboard and mouse; PU leather with stitched edges and a non-slip base.
A desktop digital microscope with a 5.5-inch HD screen, LED lighting, and a stand, for viewing small details, taking photos and video, and connecting to a computer.
A thin, light stand that bends to any angle, holds a phone, tablet, or laptop on the desk, and fits easily in a bag.
A colorful, flexible LED strip that changes colors to the rhythm of the music, controlled from a phone or a remote, and comes with a controller and a 24V power supply.
A set of 5 flexible plastic spatulas for removing prints and resin residue from the print surface and the vat of a 3D printer, without scratching.
A black protective gear set for riding a skateboard, roller skates, a scooter, and a bicycle: a helmet, a pair of knee pads, a pair of elbow pads, and a pair of wrist guards.
A small pen-style electric screwdriver with adjustable torque and an aluminum case holding 64 bits, for disassembling and repairing small devices.
Rechargeable 3.7V spare batteries with a 600mAh capacity for the 4DRC V8 drone, in a pack of 10 – so several groups in the classroom can fly without waiting for a charge.
An electronics and programming learning kit built around an ESP32 development board with WiFi, including sensors, a small display, a relay module, a breadboard, and basic components – all in a clear storage box.
An extended mouse and keyboard pad with an RGB light strip along the edges, a smooth fabric surface, and a non-slip rubber base.
A polished glass crystal in the shape of a diamond, which serves as a paperweight and a decoration for a desk, shelf, or awards corner.
A rechargeable pen-style soldering iron with a built-in battery, five temperature levels between 260 and 420 degrees, and a digital display, in a carrying case with accessories.
A desktop charging station with 12 USB ports and a total output of 60W, with a built-in cooling fan and indicator lights.
A black protective gear set for riding a bicycle, scooter, skateboard, and roller skates: a helmet and pairs of guards for the knees, elbows, and wrists.
A desktop charging station with 6 ports, including USB-C PD 25W and USB QC3.0, a digital voltage display, and a 1.5 meter power cable.
A small rechargeable screwdriver with 4 torque levels, LED lighting, and a manual mode, for repairs, assembly, and work on computers.
A set of 9 long hex (Allen) keys in different colors, from 1.5 to 10 mm, in one holder.
Small stainless steel pliers with a black handle for beadwork, jewelry, and thin wires: serrated needle-nose, smooth needle-nose, or cutter.
A smart universal remote that connects to the WiFi network and lets you operate an air conditioner, TV, and set-top box from the phone app, even from outside the room.
A pair of 75×75 mm sticky note pads designed like the "Notepad" window of an old computer, 50 sheets in each pad.
A robotic base that a smartphone attaches to magnetically and uses as its face: voice conversation in English with ChatGPT, face recognition, and personal interaction.
A hexagonal board game with pegs: stretch a rubber band between pegs, and each triangle that closes receives a token in the player's color.
A multi-layer cylinder puzzle: turn the rings and slide the cubes until each color is arranged in its own column.
A wooden 3D self-assembly puzzle in the shape of an aircraft carrier, with a mechanism that launches a plane using a rubber band.
A complete station for recording a podcast at school: a computer, a large 24-inch monitor, a keyboard and mouse, two headsets, two microphones on stands, a mixer with 4 inputs, and editing and recording software.
Four professional CST slick tires on rims, for upgrading the educational karting and drift vehicle. A complete set of four, ready for assembly.
A simple device that teaches many subjects: students build a wooden launcher, fold paper airplanes, calculate, launch, and learn — science, technology, engineering, and math in one device.
An optics experiments kit: lenses, mirrors, prisms, and a light source, for a series of experiments with light. The packaging is in Chinese by default.
Glow-in-the-dark hourglass
An hourglass that glows in the dark, for timing in the classroom and in activities. Sold in a pack of 10 units.
A large acrylic thermometer for classroom demonstration, in Celsius and Fahrenheit. Sold in a pack of 10 units.
A storage box with test tubes, a stand, measuring tools, gloves, and safety goggles — a basic kit for chemistry experiments.
A laboratory case with glassware, a stand, and a burner, and 45 substances for experiments — a complete kit for chemistry lessons.
A transparent cell with a partition, zinc and copper plates, and wires with clips — you build a battery from metals and a solution, and measure voltage.
A transparent electrolysis cell with two electrodes and an adjustable power supply with a display — you split water into hydrogen and oxygen and measure the volumes.
A wooden self-assembly kit made of laser-cut parts. A rotating model of the Sun, Earth, and Moon — it teaches day and night, month, and year.
A physics experiments kit that covers light and forces — optics and mechanics in one kit. The packaging is in Chinese by default.
A model of a transparent wind tunnel with a wing, showing how airflow creates lift. The packaging is in Chinese by default.
A teacher's demonstration case with components for experiments in electricity, electromagnetism, and magnetism. The packaging is in Chinese by default.
Small bulbs with an E10 screw base, for electric circuits in the classroom. A pack of 50 bulbs.
A holder for a small E10 bulb with two 20 cm wires, for electric circuits in the classroom. Sold in a pack of 10 units.
A holder for 3 AA batteries with wires, without a switch. Sold in a pack of 10 units.
A holder for 2 AA batteries with wires, without a switch. Sold in a pack of 10 units.
A holder for 2 AA batteries with an on/off switch and wires. Sold in a pack of 10 units.
An 8520 motor with a propeller for model airplanes. Sold in a pack of 10 units.
A 720 motor with a propeller for model airplanes. Sold in a pack of 10 units.
A 716 motor with a propeller for model airplanes. Sold in a pack of 10 units.
A capacitor, a motor, and a control board for building a small electric airplane. Sold in a pack of 10 units.
A yellow gear motor, 3–6V, for robots and cars. Sold in a pack of 10 units.
A small 5V DC motor for learning kits and toys. Sold in a pack of 10 units.
A small thermometer on a card, for students' temperature experiments. Sold in a pack of 10 units.
A large laboratory suitcase with a variety of glassware, stands, a burner, and measuring tools — for advanced chemistry experiments.
A suitcase full of lab tools — glassware, a stand, a burner, safety goggles, and measuring tools — for dozens of chemistry experiments in class.
A transparent three-compartment cell with electrodes and connectors — a galvanic cell, electrolysis, and metal plating (galvanization) in one kit.
Atom balls in colors by element and bond sticks, in a suitcase with compartments — build organic and inorganic molecules and crystal structures.
An electrolysis cell with a PEM membrane and two marked collection tanks — produces hydrogen and oxygen from water and shows the 2:1 volume ratio.
A wooden self-assembly kit, with laser-cut parts. A catapult with a basket — teaches levers and throwing.
A wooden self-assembly kit, with laser-cut parts. A pen that floats between magnets — teaches magnetic repulsion.
A wooden self-assembly kit, with laser-cut parts. A music box with a rotating handle — teaches how sound is produced by a mechanism.
An assembly kit that shows how electric current moves a compass needle — Oersted's experiment, the link between electricity and magnetism.
A wooden self-assembly kit, with laser-cut parts. A plane on wheels with a propeller driven by a rubber band — teaches elastic energy and thrust.
A wooden self-assembly kit, with laser-cut parts. A car with a propeller driven by a stretched rubber band — teaches elastic energy.
A wooden self-assembly kit, with laser-cut parts. A car that moves by the repelling force of magnets — teaches magnetic poles.
Motorized wooden dinosaur
A wooden self-assembly kit, with laser-cut parts. A dinosaur with a motor that walks forward; three models with a remote control and one electric model.
A wooden self-assembly kit, with laser-cut parts. A machine with two spinning wheels that throws ping-pong balls — teaches rotary motion and speed.
A wooden self-assembly kit, with laser-cut parts. Turn a handle, the pulleys turn a motor and a bulb lights up — teaches how electricity is produced from motion.
An assembly kit for the frame of a house made of wooden beams — teaches the stability of structures and load distribution.
An assembly kit for a car that runs on solar energy or on batteries — compares two energy sources.
A wooden self-assembly kit, with laser-cut parts. A robot with a motor that climbs along a taut rope — teaches gears and friction.
A wooden self-assembly kit, with laser-cut parts. A box that opens only with the right combination — teaches how a combination lock works.
A wooden self-assembly kit, with laser-cut parts. A cart with a cannon that fires air rings — teaches air pressure and motion.
A wooden self-assembly kit, with laser-cut parts. A tensegrity structure whose upper half "floats" on taut strings — teaches tension and compression in structures.
A wooden self-assembly kit, with laser-cut parts. A speaker with an amplifier that plays from a USB drive — teaches how sound is produced and how a speaker works.
An assembly kit for a Ferris wheel that turns with a solar panel and a motor — teaches renewable energy and energy conversion.
A wooden self-assembly kit, with laser-cut parts. An arm with a motor and a propeller that rotates around a pole — teaches a simple electric circuit and rotary motion.
A wooden self-assembly kit, with laser-cut parts. An excavator on a base with several joints, each operated by its own syringe.
A wooden self-assembly kit, with laser-cut parts. An excavator arm that moves by water power through syringes — teaches hydraulic pressure and levers.
An ESP32 board with built-in WiFi and Bluetooth and a dual-core processor. You program it from the Arduino IDE or in Python (MicroPython) — for projects that connect to the internet and to a phone.
A Mega 2560 board compatible with Arduino, with many more pins and much more memory than the UNO, including a USB cable. For large projects — a robot with many motors and sensors, a screen, or a printer.
A small Nano board compatible with Arduino, with an ATmega328P processor — the same processor as in the UNO — and a Type-C socket. It plugs straight into the breadboard and suits a project that needs a small board.
6 small breadboards of 170 points, each in a different color, with a sticker on the back. Room for a small circuit next to the controller — or several of them together, since they lock to one another at the sides.
10 active buzzers for 5V with a diameter of 12 mm. Connect them to voltage and they beep with a continuous tone, with no need for a frequency from the controller — for an alarm, a timer, and an alert in an Arduino project.
An Allen screw — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Steering rods – pair — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Washer — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Hexagonal profile - per meter — original spare part for the GO KART 17 IN1 EDU kit, from the kit supplier. Sold per meter.
Brake cable — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Long nut M6×20 — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Nut — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Lock nut — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Slide nut M8 — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Toothed washer — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Allen key — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Wrench — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Pliers — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Battery — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Battery cable for the motor (yellow) — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier. The yellow cable that connects the battery to the motor. In the picture — the battery holder with the cable.
Battery holder with cable — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier. The battery holder with the yellow cable that connects it to the motor.
Brushless motor — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Charger — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Spacer ring — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Toothed drive belt (936) — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Belt pulley – large and small — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier. The large gear wheel (62 teeth) and the small one of the belt drive system, together.
12-inch wheel with brake disc — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
12-inch wheel with bearing — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Tape measure — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Shock absorber — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Platform (Board) — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Hexagonal spacer — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Hex handle — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Cone spacer — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Protective cap — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Bearing connector cover — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Toothed connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Cable clip — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
T block — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Square block — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Brake kit – lever and brake — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier. A brake lever for the handlebar and a brake (caliper) for the disc, in one kit.
Throttle lever — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Grip handle — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
40×40 connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Hexagonal connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
40×120 connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Hexagonal bearing connector 40×80 — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Hexagonal bearing connector 40×40 — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Angle connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Connector with M8 bearing — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
U connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
Triangle connector — an original spare part for the GO KART 17 IN1 EDU kit, from the kit's supplier.
10 reed switches in a glass tube, 2×14 mm: the contact closes when a magnet is brought near. For a door sensor, a revolution counter, and magnetism experiments.
120 electrolytic capacitors in 12 values, from 0.22µF to 470µF, 16V and 50V. One kit that covers what classroom circuits need — filters, delays, and blinking.
10 blue trimmers of type 3362P, 10KΩ — small variable resistors adjusted with a screwdriver. For adjusting a sensor's sensitivity, brightness, or voltage in a circuit.
100 diodes 1N4007 — the most common diode: it passes current in one direction only. For protecting a circuit from a reversed battery connection, rectifying current, and projects with motors.
A tiny DC motor of type N20, 10×12 mm, without a gearbox — one shaft and two contacts at the end. Fast and small, for tiny models and small fans.
An ISD1820 module that records a short sound clip and plays it back, with a microphone, buttons, and a small speaker. Press to record and press to play — for talking models and bells.
5 black rocker switches marked O/I, 2 legs, snap into a 21×15 mm hole. A power switch for a model, a box, or a circuit.
5 bridge rectifiers (diode bridges) KBPC5010 in a metal case, 50A and 1000V. They turn alternating current into direct current — for power supplies and electronics lessons.
5 micro servo motors, model SG92R, 9 grams — the same size as the familiar SG90 and with higher torque. For robot arms, gates, and any movement at a precise angle.
10 strips of 40 male pins at the standard 2.54 mm spacing. Break to the required length and solder to a module or board, to connect it to a breadboard or Dupont wires.
A black battery holder for 4 AA batteries, with a screw-on cover, a power switch, and red and black wires. Provides 6V to a motor, a robot, or a circuit — and the batteries are enclosed inside.
5 small DC motors type 130, with a white plastic cover and solder tabs. They run on 3–6V — one or two batteries — and suit a fan, a car, or any model that needs movement.
A screen protector for a 14-inch laptop that blocks harmful blue light and UV radiation and reduces glare — less eye fatigue and dryness after a day of learning in front of the screen. Application is self-service and simple.
A 10 m³ helium cylinder, full, with a professional regulator and a pressure gauge — enough for about 800 to 850 12-inch rubber balloons. For special days, ceremonies, school events, and science experiments.
198 gears for building mechanisms in a robot: gears of 40, 24, 16, and 8 teeth, double bevel gears, worm gears, and differentials. Suitable for SPIKE Prime and LEGO Technic. A compatible product, not an original product of the LEGO company.
50 RGB LEDs, 5 mm in diameter, with a common cathode and a diffused lens: red, green, and blue in one LED, and from them every color. For practicing PWM and color mixing.
10 light-dependent resistors (LDR), model GL12528, 12 mm in diameter: resistance drops as there is more light. For an automatic night light, a day-night sensor, and light experiments.
50 momentary push buttons, 6×6×4.3 mm, that fit into a breadboard. The first input you connect to an Arduino or micro:bit.
5 yellow TT motors with a 1:48 gearbox and a shaft on both sides — the motor in most robotic cars in the classroom. They run on 3–6V.
L298N module for controlling two DC motors — direction and speed — or one stepper motor, from an Arduino or micro:bit. The heart of a simple robot car.
10 holders for one 18650 battery, with a red and a black wire. Power a robot, motor, or development board from a rechargeable battery.
A breadboard for building circuits without soldering, 830 connection points with power rails on both sides. Insert components and jumper wires, and take it apart at the end of the lesson.
5 potentiometers (variable resistors) of 10KΩ with a rotating shaft, 3 legs. For controlling LED brightness, motor speed, or an analog reading on an Arduino.
100 metal film resistors, 220Ω, 1/4W, 1% accuracy — the resistor you connect before an LED at 5V. One pack is enough for a whole class.
Arduino UNO R3-compatible development board with an ATmega328P processor and an ATmega16U2 USB chip, including a USB cable. Programmed from the Arduino IDE like the original board — for programming, sensors, and robotics lessons.
10 small active buzzers (12×9.5 mm) that beep as soon as you connect them to 3V — no programming needed. For electric circuit experiments, alarms, and projects.
600 metal film resistors, 1/4W, 1% accuracy, 30 values from 10Ω to 1MΩ — 20 of each value, sorted in a box. For LEDs, sensors, and Ohm's law experiments.
500 clear LEDs, 5 mm in diameter, 100 of each color: red, green, blue, yellow, and white. For circuit experiments, breadboards, and projects with micro:bit and Arduino.
Five type-130 DC motors that run on 3–6V, and five plastic propellers — connect to a battery holder and get a spinning fan. For electricity experiments and classroom projects.
A kit for learning a simple electric circuit in the classroom: a knife switch, lamp holders with small bulbs, a battery holder, and wires with clips — build a series and a parallel circuit, turn on and off.
A stable metal stand that holds the hot soldering iron safely between solderings, with a cleaning sponge and brass wool for cleaning the tip. A must at students' soldering station.
A manual pump for sucking up molten solder: press, bring it close to the hot soldering point, and release — the solder is sucked up. For fixing a wrong solder and for removing components.
120 colorful jumper wires, 20 cm long: 40 male-to-male, 40 male-to-female, and 40 female-to-female. For connecting sensors, motors, and expansion boards to a breadboard, an Arduino, and a micro:bit.
A desktop charger for 4 batteries at once, each slot charged separately: 18650, 26650, 16340, and 18350 lithium 3.7V, and also rechargeable AA/AAA 1.2V. An LCD screen shows voltage and current for each battery — suitable for charging the batteries of classroom robots.
A professional instructor gives a lesson in the classroom as part of a program approved in Gefen — robotics, programming, micro:bit, Minecraft, and more — with all the required equipment. The price is per lesson.
The WED03 kit for learning robotics and programming in the elementary grades: build, from bricks, models that really move — an underwater treasure hunter, a ballista, Pac-Man, a wheel of fortune, a conveyor, and more — and program them in an app. An accompanying digital course is sold separately.
A 90-minute workshop with virtual reality (VR) headsets on the subject of pre-med: enter the emergency room, tour inside the brain and the human body, and solve tasks like a medical team.
A hands-on 90-minute workshop in smart home design and architecture: plan a house like architects, build a model, and program a smart controller with sensors and motors — lighting, a door, a fan, and an alarm.
A rechargeable lithium-ion battery of size 18650 (18 mm diameter, about 65 mm length), 3.7V – for robots and kits with an 18650 battery holder and for flashlights. Charged only in a lithium-ion charger.
A V8 engine building kit with a clear red cylinder head, pistons and valves that move, and a timing chain – an electric motor and a battery box drive the entire mechanism at the press of a button. More than 478 parts, from age 14.
A building and programming kit with more than 400 parts, 2 motors, a servo, 3 sensors, and an expansion board with a rechargeable battery – build a robotic arm and 31 more models and program in MakeCode or Python. The micro:bit is not included.
A round safety helmet for kids, with ventilation holes and an adjustable chin strap — for riding a bicycle, scooter, and skateboard, and for karting workshops. In sizes S and M and in several colors.
A lit building table for kindergarten and the classroom: cubes that light up when connected, for building, taking apart, and creating with light. In locally made birch wood or imported painted wood, 50 cm high.
"The Robots Are Already Here — From Science Fiction to the Classroom": a 45-minute lecture with a live robot demonstration, about the robots around us, how a robot "thinks," and the professions of the future.
A dynamic 90-minute workshop: you learn programming principles and build an animation video or a game of your own.
A fascinating 90-minute workshop in the world of 3D printing: you design a model on the computer and print it on a 3D printer.
An immersive 90-minute workshop: you build and drive a real go-kart, and learn engineering, safety, and driving principles together.
An experiential 90-minute workshop: you learn to fly drones, understand the technology behind them, and carry out challenging flight missions.
An interactive 90-minute workshop: each group receives a robot and a control unit, and programs it for challenge missions of rising difficulty — navigation, driving in a figure 8, and a competition between groups.
✈️ A real flight experience – at home. The ultimate flight simulator for RC planes, drones, and helicopters. The system lets you practice, experiment, and control different aircraft with no risk and no unnecessary expense – just connect to the computer and go fly.
A compatible power adapter (charger), not an original LEGO product, for the EV3 and NXT rechargeable battery: 10V, 700mA, an Israeli/European plug, and a 3.5×1.35 mm DC jack like the original charger (45517).
A battery box compatible with the LEGO Power Functions 8881 box (not original): six AA batteries, 9V, an on switch that changes direction, and Technic connections on all sides. Runs Power Functions motors and lights.
A charger for Ni-MH and Ni-Cd 1.2V rechargeable batteries, sizes AA and AAA: four slots, a charge indicator for each slot, a clear cover, and a wall plug. For the batteries of robots, remotes, and controllers in the classroom.
A small, accurate digital thickness gauge: 0–12.7 mm at 0.01 mm resolution, mm or inches at a press, zeroing at any point. A composite carbon fiber body, LR44 battery.
A soldering kit for beginners: you assemble and solder a two-arm spinner (Fidget Spinner) with four colorful LEDs, a fast bearing, and a clear case. Through-hole components — suitable for a first soldering.
A tilt sensor compatible with the WeDo 2.0 kit (45300), with a cable and connector for the Smart Hub controller. Detects which way the model is tilted.
A motion (distance) sensor compatible with the WeDo 2.0 kit (45300), with a cable and connector for the Smart Hub controller. Detects an object approaching or moving away.
A medium motor compatible with the WeDo 2.0 kit (45300), with a cable and connector for the Smart Hub controller. For replacing a motor that broke or was lost.
A Smart Hub controller compatible with the WeDo 2.0 kit (45300), for replacing a controller that broke or was lost. Two ports for a motor and sensors.
Safety glasses, clear, extendable arms, suited for children
9G SG90 micro servo motor for remote-controlled (RC) robots, helicopters, airplanes, vehicles and boats. Weight 9 g, stall torque 1.8 kg·cm at 4.8V, speed 0.1 second per 60 degrees.
A rechargeable lithium battery compatible with the LEGO EV3 controller, compatible with models 45501 and 95656. Not an original LEGO product.
Portable handheld soldering iron that connects to USB as a power source, with a replaceable tip and protective cover. Operated by a touch button on the iron body and heats up in under 10 seconds.
Combination pliers, 10 inches, with a rubberized ergonomic handle, for gripping, bending, and turning parts.
Locker for storing and charging 10 laptops, including charging ● Specially designed for computers ● Digital or analog lock for each compartment ● With a master code X 10 for the whole station ● One electrical socket outlet for charging the computers ● In each compartment a 220-volt, 16-amp socket ● In each compartment the electrical socket is suitable for charging one computer ● Total…
Side cutters for cutting wires and component leads, for electronics, robotics, and electrical work in the classroom.
A blue silicone work mat for soldering and electronics repair. It withstands heat up to 500 °C, is anti-static, and has compartments for small parts and a magnetic area for screws.
HDMI to USB-C cable, for connecting a laptop, tablet, or phone to a screen, projector, or TV in the classroom.
AA alkaline batteries (one unit out of a pack of six) for robotics kits, remotes, sensors, and educational toys.
Overview: The plotter is equipped with components for easy assembly with screws, and invites children to develop their practical skills. They will learn how to build a wooden toy, all while developing curiosity and creativity. The kit gives children a hands-on, educational experience, and improves their thinking ability.
Overview. 10 kits - a single kit cannot be bought separately. The package includes: 1 set of a toy generator. Training for children, independent thinking ability, imagination, and creativity. The look and color may vary. This must be taken into account before placing the order if there is a request for a color or look.
Overview. 10 kits - a single kit cannot be bought separately. The package includes: 1 set of a solar-energy fan, flower-model toy. Training for children, independent thinking ability, imagination, and creativity. The look and color may vary. This must be taken into account before placing the order if there is a request for a color or look.
Overview. 10 kits - a single kit cannot be bought separately. The package includes: 1 set of solar energy, a satellite-model toy. Training for children, independent thinking ability, imagination, and creativity. The look and color may vary. This must be taken into account before placing the order if there is a request for a color or look.
Overview. 10 kits - a single kit cannot be bought separately. Description: Perfect design: a small, stylish look. Small size, does not take up space. High quality: made of high-quality wood, durable. Feature: practical abilities. Advantage: easy to install. Suitable for DIY students and for fostering students' motivation.
Overview. 10 kits - a single kit cannot be bought separately. Reported item: a DIY slide projector for children, educational equipment for children in elementary school. Description: Arouses curiosity and fosters learning among children through science, technology, engineering, and math-based activity. A multipurpose toy with a wide variety of activities focusing on…
Compatible with LEGO, not an original product. Stainless steel metal ball
Steering knuckle for the drift kit, including axle arm + aluminum adapter. Made in Israel - welding and cutting are done in Israel by a certified engineer
A hydraulic brake kit for the drift kit, for upgrading the braking system of the vehicle the students build.
A karting steering wheel 300 mm in diameter, for karting and drift vehicles that students build.
Arduino kit: Ultimate. The Ultimate kit is the preferred kit for getting started with Arduino development boards; the kit contains everything needed to carry out a project from start to finish. It comes with a very wide variety of sensors and electronic components in quality packaging.
🛰️ Smart solar tracking kit from Keyestudio – learn, build, and charge with solar energy! Meet KEYES's innovative sun-tracking kit, based on Arduino – a perfect combination of learning, technology, and hands-on projects. The kit includes 4 light sensors, precise servo motors (2 DOF), a strong solar panel…
Light 4-inch vises with a cast iron body, hard jaws, and a rear anvil, for holding parts during work.
Automatic 2-in-1 wire stripping and cutting pliers with an adjustable stop. It removes the insulation without damaging the copper core, on wire 0.5–5.5 mm thick. Length 175 mm.
A UL-1007 hookup wire kit in AWG22, five colors, 6 m of each color and 30 m in total. PVC insulation and a tinned copper conductor.
10 units, 5 colors, 30 cm long, double alligator clips, jumper wire, mini clips for DIY testing, cable testing, folder testing, hook clip testing
A multimeter compatible with Fluke, with a very large display (like a bench unit). It signals after 3 minutes of inactivity, and shuts off automatically to save the battery. Plastic coating for drop protection, automatic range detection, a combination of a wide variety of measurements, including temperature.
Programming fundamentals for kindergarten-age children: a hands-on experience and acquiring programming skills through route counting and seeing from a distance.
An ideal solution for magnifying small details with your mobile phone. Includes a sponge at the contact area to prevent damage to your device.
A LEGO-compatible storage box for storing bricks and small building parts in the classroom and the after-school club.
A pair of plastic marking posts with a 5 m chain, for cordoning off a work area when servicing electric and hybrid vehicles.
37 sensors kit. A kit containing 37 sensors for beginners who want to start developing electronics projects, a set of the most common and useful components for a variety of projects.
The learning kit is compatible with Arduino and provides an advanced standalone Wi-Fi solution. It is ideal for developing applications, with support for Arduino IDE, Mongoose IoT, and MicroPython.
DC motor with a gearbox – compact, strong, and precise. Looking for a small motor that delivers big performance? A DC motor with a gear is the perfect solution for you! The motor comes with a built-in gear system (Gearbox) that performs smart power transmission – and makes it possible to get maximum power out of the motor in minimum space.
A flight-training drone with a 4K camera, for practicing flying and learning basic programming. Includes a companion website for the product.
Seat for the GO KART 17 IN1 EDU kit, made of rigid plastic with holes fitted for mounting on the chassis.
A digital soldering station with a soldering iron: a display that shows the temperature and buttons for adjusting it. For work in the classroom, the after-school club, and the lab. The model and manufacturer vary, and the pictures are for illustration.
Professional drone assembly kit, enabling students full understanding through drone building combined with pedagogy in aeronautics, electricity, electronics, and control. The only kit in Israel that requires no soldering, coming with a special connection board developed in Israel.
A hot glue gun with 5 glue sticks, for 230V connection and approved by the Standards Institution of Israel, for gluing in projects and crafts.
🚀 Wooden Drone DIY Kit – learning to rise to new heights. Meet the wooden assembly drone (Wooden Drone DIY Kit) – a smart educational toy that turns every classroom into an innovation lab. The product was developed especially for students and teachers who want to combine a hands-on experience with meaningful learning. Why is it good for studies?
A tall bar stool for workstations and high tables in a makerspace or a lab.
PLA is a polymer printing raw material for printing on a heated bed. Available in a variety of colors. An upgraded version of PLA, higher print quality while using the same settings. PLA is a thermoplastic polymer made from corn; it is environmentally friendly and easy to print with.
A digital microscope together with an online course of tasks and thinking challenges, for self-learning in the classroom or at home.
A benchtop switching DC power supply, 0-30V and 0-10A (300W), with an LED display and continuously adjustable voltage and current. Includes over-voltage, over-current, and over-temperature protection.
A kit containing all the essentials for makers. Product page in English. Arduino controller, digital and analog sensors, DC motor and servo motor, resistors, breadboard, jumper wires, transistors, a distance sensor, and even a sound card that will allow building talking projects, a driving platform with a mount for 360 scanning…
The GO KART 17 IN1 EDU kit for education - large assembly kits for children, adapted for schools, with a fast charger, and the ability to connect an additional battery or assemble with an additional kit and get a large, strong vehicle able to carry a passenger weighing 120 kg at a stable speed.
A metal base 1800X700 mm for a table, with square frame legs, with or without wheels, to choose
Your ultimate repair kit. A 115-in-1 magnetic screwdriver set made of durable carbon steel. A compact, comprehensive solution for every electronic repair – from smartphones to drones. An ergonomic design, magnetic tips, and a smart carrying case ensure smooth and precise work. Don't get stuck without the right tool – invest in a set that gives you full control over every screw, at any time.
A desktop charging station with 50W output and 2 USB-C ports and 4 USB ports, for simultaneously charging a 3D pen, phones, and technology equipment. A European two-pin plug that fits an Israeli socket.
Training of an instructor or teacher for teaching. A training service, no delivery — the training date and details are coordinated after the order is approved.
An annual subscription for an institution to the professional companion website. An online service, no delivery — access details are provided after the order is approved.
A guided tour of Robotix's “Chalomtziut” innovation complex — a hands-on encounter with robotics, 3D printers, interactive screens, and STEM labs, adapted to the group's age.
Registering the school team for the SCA International Smart City AI competition and reserving the Smart City surface. Includes the physical competition surface for training at the school, participation in the chosen judging hub, and full access to the support materials.
A 10.1-inch tablet for children with a durable protective case, with educational apps and parental controls installed, suitable for ages 3-12.
A 3D printing pen for children with an LCD display, independent temperature control, and 3 adjustable output speed levels.
Students build and disassemble models and work with adult tools and peers, to assemble a go-kart built by the students.
A makers kit for learning programming and building a smart home, based on open-source Micro-compatible hardware, with temperature, humidity, gas, and motion sensors and an LCD display.
A smart tank robot based on Raspberry Pi 4B with a real-time WiFi camera and AI recognition capabilities (face recognition, color tracking, QR reading).
A smart robotic vehicle with 4 Mecanum wheels and 4 motors, based on an Arduino controller, including a WiFi camera.
The Alpha robot from France — the only robot of its kind in the Israeli market.
For building a smart home, karting, elevators, or anything at all. Over 100 elementary and high schools are already creating with the kits.
A metal workbench that withstands a load of up to 1000 kg, with the option of adding a back board/system for hanging tools.
A standard competition table to FLL association dimensions, in the basic version without metal legs and without openings in the sides.
We arrive with all the necessary equipment and the best mentors, drawing on our experience and training, with over 17 years of experience, including dozens of trophies we have won over the years.
Tweezer pliers with protected handles, suited for children and teens.
A 10-meter extension cord reel with four sockets and a protective fuse, for connecting workstations and power tools.
A professional machinist's hammer weighing 2 kg, for jobs that need force: straightening metal and working with chisels.
A small, precise cutter for cutting wires and components in electronics and maker work.
6-inch combination pliers for general use: gripping, bending, and cutting thin wire, with rubber handles.
Needle-nose pliers (beak/needle-nose) for electronics and precision work.
A storage box with 6 compartments and a transparent lid, for sorting screws, nails, nuts, and small components.
We take one space in the school and turn it into an urban corner and an inspiring space. Imagine parents coming to work together with the students.
Design of an innovation room in the school (7×7), including supplier management — we bring in all the suppliers and take care of everything.